Product Usage and Principle
MOV-1000 electrostatic precipitator is a honeycomb dust remover with movable supporting frame, generally installed in completed tunnels or construction sites. MOV-1000 is one piece construction. So it is convenient for hoisting, movement and vehicle transport. Besides, the housing made of galvanized steel cost low. In conclusion, MOV-1000 is a economical way of dust removal in construction sites.
The principle of MOV-1000 will be described as follow:
Firstly, dust gas flow close to the helical spike which powered by 12-15KV high voltage current in the case. Then the particles in the dust gas are charged negative under the effect of High-pressure ionization. Induced voltage and current are generated to dust collecting section(Honeycomb tube). Finally, dust sticks to dust collecting section because of characteristic of positive and negative charge.
Schematic diagram for principle of Movable electrostatic precipitator
Product features
MOV-1000 electrostatic precipitator has the following product features:
1. The housing is made of lacquered carbon steel. The dust collecting section is made of galvanized steel. This material composition is not only cost low, but also have a long service life and beautiful shape.
2. Honeycomb dust collecting section and filter net can be taken as a whole. It is convenient for maintenance and cleaning.
3. One piece construction is convenient for hoisting, movement and vehicle transport. So as to filter out the large particles and prevent the damage to the system, filter net is installed in the air inlet of MOV-1000.
4. A variety of intelligent protection modes can be switched randomly in the high voltage power supply pack. It meet the needs for any protection measures in any occasions.
5. Easy operation, only need to press the toggle button to on and off.
6. High efficiency, high wind velocity, large air quantity, low running cost.